Filter
Top Products
CY8C22113, CY8C22213
Document Number: 38-12009 Rev. *F Page 20 of 36
DC Analog Reference Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ T
A
≤ 85°C, or 3.0V to 3.6V and -40°C ≤ T
A
≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only or unless otherwise specified.
The guaranteed specifications are measured through the Analog Continuous Time PSoC blocks. The power levels for AGND refer to
the power of the Analog Continuous Time PSoC block. The power levels for RefHi and RefLo refer to the Analog Reference Control
register. The limits stated for AGND include the offset error of the AGND buffer local to the Analog Continuous Time PSoC block.
Note Avoid using P2[4] for digital signaling when using an analog resource that depends on the Analog Reference. Some coupling
of the digital signal may appear on the AGND.
DC Analog PSoC Block Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ T
A
≤ 85°C, or 3.0V to 3.6V and -40°C ≤ T
A
≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only or unless otherwise specified.
DC POR and LVD Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ T
A
≤ 85°C, or 3.0V to 3.6V and -40°C ≤ T
A
≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only or unless otherwise specified.
Note The bits PORLEV and VM in the following table refer to bits in the VLT_CR register. Refer the PSoC Programmable
System-on-Chip Technical Reference Manual for more information on the VLT_CR register.
Table 18. 5V DC Analog Reference Specifications
Symbol Description Min Typ Max Units
– AGND = Vdd/2
a
CT Block Power = High
a. AGND tolerance includes the offsets of the local buffer in the PSoC block. Bandgap voltage is 1.3V ± 2%.
Vdd/2 - 0.043 Vdd/2 - 0.025 Vdd/2 + 0.003 V
Table 19. 3.3V DC Analog Reference Specifications
Symbol Description Min Typ Max Units
– AGND = Vdd/2
a
CT Block Power = High Vdd/2 - 0.037 Vdd/2 - 0.020 Vdd/2 + 0.002
V
a. AGND tolerance includes the offsets of the local buffer in the PSoC block. Bandgap voltage is 1.3V ± 2%
Table 20. DC Analog PSoC Block Specifications
Symbol Description Min Typ Max Units
R
CT
Resistor Unit Value (Continuous Time) – 12.24 – kΩ
C
SC
Capacitor Unit Value (Switch Cap) – 80 – fF
Table 21. DC POR and LVD Specifications
Symbol Description Min Typ Max Units
V
PPOR0R
V
PPOR1R
V
PPOR2R
Vdd Value for PPOR Trip (positive ramp)
PORLEV[1:0] = 00b
PORLEV[1:0] = 01b
PORLEV[1:0] = 10b
–
2.908
4.394
4.548
–
V
V
V
V
PPOR0
V
PPOR1
V
PPOR2
Vdd Value for PPOR Trip (negative ramp)
PORLEV[1:0] = 00b
PORLEV[1:0] = 01b
PORLEV[1:0] = 10b
–
2.816
4.394
4.548
–
V
V
V
[+] Feedback