Filter
Top Products
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.7.5 Ethernet Settings
Datalogic Skorpio™ can be connected to an Ethernet network by inserting it into the
Datalogic Skorpio™ Ethernet Multi Cradle.
NOTE
Ethernet communication requires Datalogic Skorpio™ SW version
5.41 or later. Verify the software version by tapping on Software –
Version in the Datalogic default home page. Otherwise, search for
the file version.htm under the Windows folder.
When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installed
on the mobile computer will automatically run, and using the DHCP service, will
dynamically assign the IP Address.
1. From the Datalogic Skorpio™ open Internet Explorer>Internet Options and
check use LAN no autodial then OK.
2. From the Datalogic Skorpio™ > Explorer, enter the IP address or the PC
name in the address bar. You may be required to enter your network
username and password. The LAN connection will take place and you will
be able to see the PC shared folders and exchange files.
If your network provides Internet Service and does not use a proxy server you can
directly access the Internet. Otherwise set the internet proxy parameters according to
your network settings.
40