Filter
Top Products
USE AND FUNCTIONING
3
connection name, select “Direct Connection” and press “Next”. From the device
list select “Serial cable on COM1” and change the communication speed under
“Configure” to 115200 baud. Then, press “Security Settings” and select the
“Preview user name and password” flag. Press “Finish” to save the configuration
and close all windows.
3 –PC Connection
Follow the procedure to start the connection from the PC side:
a) Connect the device cradle to the PC through a serial cable (refer to the cradle
Instruction Manual);
b) Share the desired directories as if working in a typical network connection.
4 –Mobile Computer Connection
Follow the procedure to start the connection from the mobile computer side:
a) Insert the mobile computer into the cradle.
b) Activate “Control Panel”->“Network and Dial-up connections”->“<your connection
name>”. Within the “Enter Network Password” window insert user name and
password (among those allowed in step d) of the PC Settings procedure) and
press the “Ok” button. If the connection succeeds, the “Connected” message will
appear within the “<your connection name>Status” window.
c) Activate “My Device”; then, select “Address Bar” from the “View” menu, insert
\\<host name> and press “Enter” from the keyboard. Insert user name, password
and host domain within the new window.
Now, the directory list will display those directories previously shared by the PC. All
directories can be managed as if working in a typical LAN connection.
47