Filter
Top Products
30 E-4203/E-4204/E-4304
4.5.4 Label Alignment Troubleshooting
If you experience label alignment problems, the following table offers
possible causes and solutions.
Problem Possible Cause Solution
Attempting to
perform Label
Alignment
results in no
paper
movement.
With the Present
Sensor enabled,
Label Alignment
cannot be
performed without
a Label Length.
¾ Set Label Alignment to AUTO,
press and hold FEED until
media moves for the automatic
length measurement.
~OR~
¾ Re-measure the Label
Alignment Length. Use Printer
Setup mode to enter the new
length. Print a Database
Configuration label to ensure
the new length has been set.