Dell 130T Laptop User Manual


 
support.dell.com SAN Configurations 2-15
DELL CONFIDENTIAL - Preliminary 3/16/00
(Rev. 11/3/98) FILE LOCATION:
S:\SYSTEMS\San\San2_0\I&T_Guide\English\91WYJ_A00\91WYJc20.fm
c. For the Windows NT servers, do the following:
1. Cable the Windows NT servers to the switches.
2. Cable the 650F/651Fs associated with the Windows NT servers to the
switches.
3. Create a zone for the Windows NT servers and its storage and save the
zone, add the zone to the configuration, save the configuration file,
enable the configuration, and save the configuration file again.
4. Reboot the Windows NT servers.
d. For the NetWare servers, do the following:
1. Cable the NetWare servers to the switches
2. Cable the 650F/651Fs associated with the NetWare servers to the
switches.
3. Create a zone for the NetWare servers and its storage and save the
zone, add the zone to the configuration, save the configuration file,
enable the configuration, and save the configuration file again. For
instructions, see the zoning documentation that came with your
system.
4. Reboot the NetWare servers.
4. Install the Data Managed Node on at least one server in each zone. For instruc-
tions, see Chapter 10, Installing and Configuring Windows NT SAN Software
Components.
5. Install the QLogic Fibre Channel Configuration Utility on the Windows NT man-
agement station. For instructions, see Chapter 4, Installing the Host Bus
Adapter in the Server.
6. Install the Dell OpenManage Data Supervisor or the Dell OpenManage Data
Administrator on the Windows NT management station. For instructions, see
Chapter 10, Installing and Configuring Windows NT SAN Software
Components.
7. Bind LUNs. For instructions, see the Dell OpenManage Data Supervisor, Event
Monitor, and Integrator Installation and Operation guide or the Dell OpenManage
Data Administrator Installation and Operation Guide.
8. Reboot servers all servers after all LUNs have transitioned to the owned state.
You can verify the state by using the Dell OpenManage Data Supervisor or the
Dell OpenManage Data Administrator.
9. Configure Dell OpenManage Storage Consolidation on the Windows NT Storage
Consolidation servers.
10. Use
Mount
commands to allocate LUNs to NetWare servers. For instructions,
see Chapter 12, Novell NetWare Support for Dell PowerVault 6xxF Storage
Systems.