Filter
Top Products
Back to Contents Page
Speaker Assembly
Dell™Vostro™1500andInspiron™1520/1521ServiceManual
Removing the Speaker Assembly
Replacing the Speaker Assembly
Removing the Speaker Assembly
1. Follow the instructions in Before You Begin.
2. Remove the optical drive (see Removing the Optical Drive).
3. Remove the hard drive (see Removing the Hard Drive).
4. Remove the hinge cover (see Removing the Hinge Cover).
5. Remove the keyboard (see Removing the Keyboard).
6. Remove the display assembly (see Removing the Display Assembly).
7. Remove the internal card with Bluetooth wireless technology, if installed (see Removing the Bluetooth Card).
8. Remove the palm rest (see Removing the Palm Rest).
9. Disconnect the speaker cable from the system board.
10. Remove the two M2.5 x 5-mm screws that secure the speaker assembly to the base of the computer.
11. Remove the speaker assembly.
Replacing the Speaker Assembly
1. Align the guide holdes in the speaker assembly with the guide posts on the base of the computer, then lower the assembly into place.
2. Replace the two M2.5 x 5-mm screws to secure the speaker assembly to the base of the computer.
3. Connect the speaker cable to the system board.
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1
speaker connector
2
M2.5 x 5-mm screws (2)
3
speaker assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.