Dell 1545 Personal Computer User Manual


 
Back to Contents Page
Center Control Cover
Dell™Inspiron™1545ServiceManual
Removing the Center Control Cover
Replacing the Center Control Cover
Removing the Center Control Cover
1. Follow the instructions in Before You Begin.
2. Remove the two screws that secure the center control cover to the computer base.
3. Turn the computer top side up, and open the display as far as possible.
4. Ease the center control cover up with a plastic scribe from the back of the computer.
5. Lift the center control cover away from the computer.
Replacing the Center Control Cover
1. Align the hooks beneath the center control cover and snap the cover in place.
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the
computer.
NOTICE: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™isnot
covered by your warranty.
NOTICE: Be extremely careful when removing the center control cover. The cover is very fragile.
1
center control cover