Filter
Top Products
7. Perform the following steps as shown in the illustration:
a. Lift the eDP cable from the computer [1].
b. Disconnect the eDP cable.
c. Remove the display panel from the computer [3].
Installing the Display Assembly
1. Connect the eDP cable to the display panel.
2. Tighten the screws to secure the display panel to the display assembly.
3. Tighten the screws to secure the display hinges to the display assembly.
4. Align and press in the display bezel to the display assembly.
5. Guide the WLAN cables through their tabs and then tighten the display hinge screws to secure the
display assembly.
29