Filter
Top Products
book.book Page 29 Monday, October 8, 2012 4:17 PM
Replacing the Optical Drive
Procedure
1 Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
2 Replace the screws that secure the optical-drive bracket to the
optical drive.
3 Align the tabs on the optical-drive bezel with the slots on the
optical-drive assembly and snap the optical-drive bezel into place.
4 Slide the optical-drive assembly into the optical-drive bay until it is
fully seated.
5 Replace the screw that secures the optical-drive assembly to the
computer base.
Postrequisites
1 Replace the base cover. See "Replacing the Base Cover" on page 20.
2 Replace the battery. See "Replacing the Battery" on page 13.
3 Follow the instructions in "After Working Inside Your Computer" on page 11.
Optical Drive |
29