Filter
Top Products
book.book Page 55 Monday, October 8, 2012 4:17 PM
Replacing the LAN-USB Cable
Procedure
1 Adhere the LAN-USB cable to the computer base.
2 Route the LAN-USB cable through the routing guides on the
computer base.
3 Connect the LAN-USB cable to the system-board connector.
4 Connect the USB-board cable to the USB-board connector.
Postrequisites
1 Replace the LAN board. See "Replacing the LAN Board" on page 51.
2 Replace the palm rest. See "Replacing the Palm Rest" on page 41.
3 Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on
page 29.
4 Replace the base cover. See "Replacing the Base Cover" on page 20.
5 Replace the keyboard. See "Replacing the Keyboard" on page 18.
6 Replace the battery. See "Replacing the Battery" on page 13.
7 Follow the instructions in "After Working Inside Your Computer" on page 11.
LAN-USB Cable |
55