Dell 1908WFP Computer Monitor User Manual


 
Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User's Guide
file:///T|/htdocs/monitors/1908WFP/en/ug/operate.htm[10/31/2012 11:34:21 AM]
Menu Timer
Menu Lock
Menu Rotation
Audio Options
DCC/CI
LCD Conditioning
Factory Reset
The OSD stays active for as long as it is in use. Adjusting the hold time, sets the length of time the OSD remains active after the last time you pressed a button. Use the - and + buttons to adjust the slider in 5
second increments, from 5 to 60 seconds.
Controls user access to adjustments. When Yes (+) is selected, no user adjustments are allowed. All buttons are locked except the menu button.
NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with
OSD Lock selected. Select No (-) to unlock and allow user access to all applicable settings.
NOTE: You can also lock or unlock the OSD by pushing and holding the Menu button for 15 seconds.
Adjust your request ,the menu can be rotated to horizontal position or vertical position .
You can select to have the audio on or off when the monitor is in power saving mode.
Yes — enables audio
No — disables audio (default)
NOTE: When the Dell Soundbar is not properly connected to the monitor, the audio menu is not available.
Display Data Channel/Command Interface- allows you to adjust the monitor parameters (brightness, color, balance, etc.) via software applications on your PC.
You can disable this feature by selecting "Disable".
For best user experience and optimum performance of your monitor, keep this feature enabled.
NOTE:If user select 'disable' for DDC/CI,the warning message will appear on screen.Then user can select Yes or No according to need.
Help reduce minor cases of image retention.Depending on the degree of image retention,the program may take some time to run.You can enable this feature by selecting "Enable".