Dell 1908WFP Computer Monitor User Manual


 
About Your Monitor: Dell 1908WFP For Dell Flat Panel Monitor User'sGuide
file:///T|/htdocs/monitors/1908WFP/en/ug/about.htm[10/31/2012 11:33:23 AM]
2 Dell Soundbar
power
connector
Connect the power cord for the Soundbar (optional).
3 DVI connector Connect your computer DVI cable.
4 VGA
connector
Connect your computer VGA cable.
5 USB upstream
connector
Connect the USB cable that came with your monitor to the monitor and the computer.
Once this cable is connected you can use the USB connectors on the side and bottom of the
monitor.
6 USB
connector
Connect your USB devices.
NOTE: You can use this connector only after you connect the USB cable to the computer and the USB
upstream connector on the monitor.
Side View
USB connectors (downstream)
Left view Right view
Monitor Specifications
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred
to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The following table
shows the power consumption and signaling of this automatic power saving feature:
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal operation (with Dell Soundbar and USB active) Active Active Active Green 75 W (maximum)
Normal operation Active Active Active Green 32 W (typical)
Active-off mode Inactive Inactive Blanked Amber Less than 2 W
Switch off - - - Off Less than 1 W
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the Menu or Plus buttons are pressed
when in Active-off mode.
or