Filter
Top Products
Back to Contents Page
Speakers
Dell Studio One 19/1909 Service Manual
Removing the Right Speaker
Replacing the Right Speaker
Removing the Left Speaker
Replacing the Left Speaker
Removing the Right Speaker
1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. Remove the shield (see Removing the Shield).
4. Remove the stand (see Removing the Stand).
5. Remove the processor fan and heat sink (see Removing the Heat Sink and Removing the Processor Fan).
6. Remove the four screws that secure the speaker to the chassis.
7. Disconnect the right speaker cable from the connector (SPEAKER_2) on the system board.
8. Lift the speaker away from the chassis.
Replacing the Right Speaker
1. Follow the procedures in Before You Begin.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: To locate the right speaker, see Inside View of Your Studio One.
NOTE: Make a note of the cable routing before you dislodge the cable.
1
screws (4)
2
speaker cable