Filter
Top Products
Installing the System-Board Shield
1. Align the system-board shield on the system board. Tighten the screws to secure it to the computer.
2. Install:
a. back cover
b. optical-disk drive
c. stand
3. Follow the procedures in After Working Inside Your Computer.
Removing the Memory
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand
b. optical-disk drive
c. back cover
d. system-board shield
3. Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.
13