Filter
Top Products
Removing the Back Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand
b. optical-disk drive
3. Perform the following steps as shown in the illustration:
a. Pry the edge of the base cover [1].
b. Remove the back cover from the computer [2].
Installing the Back Cover
1. Align and press the back cover, until it clicks into place.
2. Install:
a. optical-disk drive
b. stand
3. Follow the procedures in After Working Inside Your Computer.
Removing the Hard Drive
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand
b. optical-disk drive
c. back cover
3. Perform the following steps as shown in the illustration:
a. Disconnect the hard-drive cable from the computer [1].
b. Remove the screw that secures the hard-drive to the computer [2].
c. Slide the hard-drive [3].
9