Filter
Top Products
4-20 Dell PowerEdge 2100/180 and 2100/200 Systems Service Manual
System Board
Figure 4-19. System Board Removal
To remove the system board, follow these steps:
1. Remove the system board assembly.
2. Lay the system board assembly on a flat worksurface.
3. Remove the system-board mounting screw.
4. Slide the system board toward the front of the computer to disengage
the system-board mounting clips.
5. Lift the system board out of the system-board mounting bracket.
If you are replacing the system board, remove the DIMMs and the micro-
processor from the old system board and install them on the replacement board.
system-board
mounting screw
system-board
mounting clips (10)
front of computer