Filter
Top Products
Nature Mode
Mode suitable for nature scenes.
Hue
User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit
increments, from 0 to 100.
makes video image shade into greenish
makes video image shade into purplish
NOTE: Hue adjustment only available for video input.
Saturation
This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use - or + to
adjust the hue from '0' to '100'.
makes video image looks more monochrome
makes video image looks more colorful
NOTE: Saturation adjustment only available for video input.
Exit Menu
Push to exit the OSD main menu.
DISPLAY
SETTINGS
Display
Setting
submenu
DisplaySettingsubmenuforVGAinput
DisplaySettingsubmenuforDVI-D input
Back
Push to go back to the main menu.
Horizontal Po
sition
Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
NOTE: WhenusingDVIsource,theHorizontalPositionsettingisnotavailable.
Vertical Posit
ion
Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
NOTE: WhenusingDVIsource,theVerticalPositionsettingisnotavailable.
Sharpness
This feature can make the image look sharper or softer.
Use and buttons to adjust the sharpness from '0' to '100'.
Pixel Clock
The Pixel Clock and Phase adjustments allow you to adjust your monitor to your preference. These settings are accessed through the
main OSD menu, by selecting 'Display Settings'.
Use the and buttons to adjust for best image quality.
Phase
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Display Info
All the settings related to this monitor.
Display Reset
Reset the image to the original factory setting.
Exit Menu
Push to exit the OSD main menu.
OTHER
SETTINGS