Dell 2450 Server User Manual


  Open as PDF
of 12
 
1-8 Dell PowerEdge 2450 Systems Information Update

4. Remove the SEC cartridge and heat sink as follows.
 )<21
'

 $)<"<
<
a. Pull the tab on one side of the guide-bracket assembly away from the end of
the heat sink and pull up slightly on the SEC cartridge and heat sink (see
Figure 1-4).
b. Pull the tab on the other end of the guide-bracket assembly to disengage the
tab on the heat sink. Then lift the SEC cartridge and heat sink away from the
guide-bracket assembly (see Figure 1-4).
air blower
power supply
enclosure
tab
air blower
power cable
slot
 previous next