Filter
Top Products
Removing the Stand | 47
18
Removing the Stand
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the Back Cover. See "Removing the Back Cover" on page 19.
Procedure
1 Remove the screws that secure the stand to the hard-drive cage.
2 Lift the stand off the computer base.
1 screws (6) 2 stand
1
2
OM_Book.book Page 47 Friday, April 27, 2012 3:23 PM