Filter
Top Products
Removing the I/O Panel | 91
40
Removing the I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the back cover. See "Removing the Back Cover" on page 19.
2 Remove the stand. See "Removing the Stand" on page 47.
3 Remove the trim cover. See "Removing the Trim Cover" on page 87.
Procedure
1 Press the I/O panel towards the top of the computer and then pivot the I/O panel
upward.
2 Ease the securing tabs on the I/O panel and lift the I/O panel off the computer base.
1 securing tabs 2 I/O panel
1
3
OM_Book.book Page 91 Friday, April 27, 2012 3:23 PM