Filter
Top Products
18 Setting Up
www.dell.com | support.dell.com
To remove the computer stand:
1 Turn the computer over so that the stand is at the top.
2 Loosen the thumbscrew and lift the stand away.
3 Place the computer in a horizontal position.
See the documentation that came with the printer for any recommended
preparation procedures, such as:
• Removing the packaging
• Installing the toner or ink cartridge
• Loading paper
Then follow the instructions that came with the printer to connect it to the
computer. If no information is provided, see the following sections.
Parallel Printer
1 Turn off the computer (see page 22).
NOTICE: Use only a standard IEEE parallel cable measuring 3 m (10 ft) or
less to connect the printer to the computer. Use of a nonstandard cable may
prevent the printer from working.