Filter
Top Products
70 Adding Parts
www.dell.com | support.dell.com
6 If necessary, remove a memory module:
a Press out the securing clip at each end of the memory module
connector.
b Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back
and forth to remove it from the connector.
7 To insert a module, press out the securing clip at each end of the
memory module connector.
8 Align the notches on the bottom of the module with the crossbars in
the connector.
NOTICE: To avoid breaking the memory module, do not press near the middle
of the module.
securing clips (2)
notches (2)
step 7
memory module
cutouts (2)
connector
step 8
step 9
memory module connectors