Filter
Top Products
29
Figure 1-21. Community Table
Deleting Communities
1
Open the
SNMP Community
page.
2
Click
Show All.
The
Community Table
opens.
3
Select a community from the
Community Table.
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The selected community entry is deleted, and the device is updated.
Configuring Communities Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNMP
Community
page.
Table 1-7. SNMP Community CLI Commands
CLI Command Description
snmp-server community
string [ro | rw | su] [ip-
address]
Sets up the community access string to permit
access to SNMP protocol.
snmp-server host {ip-address
| hostname} community-
string [1 | 2]
Determines the trap type sent to the selected
recipient.
show snmp Checks the SNMP communities status.