Filter
Top Products
59
Displaying the MSTP Instance Table
1
Open the
MSTP Settings
page.
2
Click
Show All
to open the
MSTP Instance Table
.
Figure 1-34. MSTP Instance Table
Defining MST Instances Using CLI Commands
The following table summarizes the equivalent CLI commands for defining MST instance groups as displayed in
the
MSTP Settings
page.
Table 1-16. MSTP Instances CLI Commands
CLI Command Description
spanning-tree mst
configuration
Enters MST Configuration mode.
instance
instance-id
{add | remove} vlan
vlan-range
Maps VLANs to the MST instance
name
string
Sets the configuration name.
revision
value
Sets the configuration revision number
spanning-tree mst
instance-id
port-
priority
priority
Sets the priority of a port.
spanning-tree mst
instance-id
priority
priority
Sets the device priority for the specified
spanning tree instance.
spanning-tree mst max-
hops
hop-count
Sets the number of hops in an MST region
before the BPDU is discarded and the
information held for a port is aged.
spanning-tree mst
instance-id
cost
cost
Sets the path cost of the port for MST
calculations
exit Exits the MST region configuration mode and
applies configuration changes