Dell 6300 Fax Machine User Manual


  Open as PDF
of 6
 
Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information5
,QVWDOOLQJWKH6&6,&DEOH
NOTE: The SCSI cable installation described in this document is a typical installation
of the SCSI cable used with the 1 x 2 backplane. You can install the SCSI cable
differently, depending on redundant arrays of independent disks (RAID) configurations
and the existence of SCSI peripheral cards. Refer to your operating system documen-
tation for information on how to set up your SCSI devices.
To install the SCSI cable to the 1 x 2 backplane, perform the following steps:
1. In the customer kit, locate the nonterminated 68-pin SCSI cable. (This cable has
two connectors at one end and one connector on the other end. See Figure 3.)
)LJXUH,QVWDOOLQJWKH6&6,&DEOHWR[%DFNSODQH
top drive connector
bottom drive
connector
SCSI cable
SCSI controller
on system board
 previous