Filter
Top Products
12-8 SAN Installation and Troubleshooting Guide
12. If you are asked to save the existing file scsisan.cdm select No and press
<Enter>.
This message only occurs if you have previously installed this file.
13. If you are asked to save the existing file scsisan.ddi select No and press
<Enter>.
This message only occurs if you had installed this file previously.
14. At the Specify server boot path prompt, type the path to server.exe, or press
<Enter> to accept the default path of c:\nwserver.
15. Select No at the prompt Do you want to select an additional Disk driver?.
16. Select Return to previous menu twice.
17. Select Exit to exit the installation program.
The installation program makes all necessary additions and changes to the
startup.ncf file and sets the values appropriately, so you should not need to adjust
any driver settings.
,QVWDOOLQJWKH+$' 08WLOLW\
1. The hadm.nlm file is located in the \ATF\Install\NW\hadm directory on the Dell
PowerVault Fibre Channel Utilities CD.
2. Copy the hadm.nlm file to a system that is running a NetWare client.
3. Connect and log on to your NetWare server using the system that you just copied
the file to.
4. Map a drive letter to the SYS: volume on your NetWare server.
5. Create a directory on the SYS: volume to store your Dell OpenManage ATF for
NetWare files. For this example, we use \system\Dell\ATF\ as the directory
name.
NOTE: Dell OpenManage ATF for NetWare must be installed to a local drive on the
NetWare server. If the SYS: volume is located on the SAN storage array, Dell
OpenManage ATF for NetWare must be installed on a different, locally attached
volume.
6. Copy the Dell OpenManage ATF for NetWare file, hadm.nlm to the \sys-
tem\Dell\ATF\ directory.
For additional information about how to perform an ATF restore, see the Dell Open-
Manage ATF for NetWare Operation Guide. For information about installing ATF in a
Windows NT or Windows 2000 system, see Chapter 11, “Installing, Configuring, and
Removing Microsoft Windows SAN Software Components.”