Filter
Top Products
52 | Removing the Display Assembly
Procedure
1 Peel off the tape, lift the latch, and disconnect the display cable from the system
board.
2 Disconnect the camera cable from the system board.
3 Peel the tape off the camera cable.
4 Note the camera cable routing and remove the cable from the routing guides on
the palm-rest assembly.
5 Remove the screws that secure the display hinges to the palm-rest assembly.
1screws (3) 2tape
3 latch 4 display cable
5 tape 6 display hinges (2)
7camera cable
7
3
6
2
1
5
4