Filter
Top Products
Using Your Projector 30
AUTO SOURCE—Select On (the
default option) to autodetect the
available input signals. If you press
the Source button when the
projector is on, it automatically
finds the next available input signal.
Select Off to lock the current input
signal. If you press the Source
button when the Auto Source mode
is set to Off, you can manually select
the input signal.
VGA-A—Press Enter to detect the
VGA-A signal.
VGA-B—Press Enter to detect the
VGA-B signal.
S-V
IDEO—Press Enter to detect the
S-Video signal.
C
OMPOSITE VIDEO—Press Enter to detect the Composite Video signal.
C
OMPONENT—Press Enter to detect the Component Video signal.
D
ISPLAYPORT—Press Enter to detect the DisplayPort signal.
HDMI-A—Press Enter to detect the HDMI-A signal.
HDMI-B—Press Enter to detect the HDMI-B signal.
AUTO-ADJUST
Auto Adjust automatically adjusts the
projector's FREQUENCY and
TRACKING in PC mode. While
Auto Adjustment is in progress, the following message appears on the screen,
"Auto Adjustment in Progress...".