Filter
Top Products
Using Your Projector 32
• 4:3 — The input source scales to fit the height of the screen and projects a
4:3 image.
• Wide — The input source scales to fit the width of the screen to project a
wide screen image.
NETWORK SETTINGS—Allows you to manage the network configuration. Press Enter
to open the Network Settings menu.
•DHCP—Select
On
to assign an IP address to the projector from a
DHCP
server
automatically. Select
Off
to assign an IP address manually.
• IP Address—Press
Enter
to set up an IP address. Press
or
t
o select the
number position, or to change the number.
• Subnet Mask—Press
Enter
to set up a subnet mask number. Press
or
t
o
select the number position, or to change the number.
•Gateway—Press
Enter
to set the default gateway of the network connected to the
projector. Press
or
t
o select the number position, or to change the
number.
• DNS—Type in the IP address of the DNS server on the network connected to the
projector. 12 numeric characters are used.
•Apply Change—Press
Enter
to confirm the settings.
• Reset Network—Press
Enter
to reset to the default settings.
•Network—
Select On to
activate and
Off to
deactivate network connections
.
DC 5V P
OWER—Select this option to turn the DC 5V power On or Off.
VGA L
OOP THROUGH—Select this option to turn the VGA Loop through On or Off.