Filter
Top Products
Troubleshooting
42
NOTICE - HARD DRIVE SELF
MONITORING SYSTEM
HAS REPORTED
THAT A PARAMETER HAS EXCEEDED ITS
NORMAL OPERATING RANGE. DELL
RECOMMENDS THAT YOU BACK UP YOUR
DATA REGULARLY. A PARAMETER OUT OF
RANGE MAY OR MAY NOT INDICATE A
POTENTIAL HARD DRIVE PROBLEM —
S.M.A.R.T error, possible hard drive failure. This
feature can be enabled or disabled in BIOS setup.
Troubleshooting Software and Hardware
Problems
If a device is either not detected during the
operating system setup or is detected but
incorrectly configured, you can use the Hardware
Troubleshooter to resolve the incompatibility.
To start the Hardware Troubleshooter:
Windows Vista:
1 Click the Windows Vista Start button ,
and click Help and Support.
2 Type hardware troubleshooter in
the search field and press <Enter> to start
the search.
3 In the search results, select the option that
best describes the problem and follow the
remaining troubleshooting steps.
Dell Diagnostics
CAUTION: Before you begin any of the
procedures in this section, follow the safety
instructions that shipped with your
computer.
book.book Page 42 Thursday, June 26, 2008 12:10 PM