Filter
Top Products
16
1. Introduction
Control panel overview
This control panel may differ from your machine depending on its model.
There are various types of control panels.
1 Toner LED Shows the status of the toner (see "Status LED" on
page 53).
2 Status LED Shows the status of your machine (see "Status LED"
on page 53).
3
WPS
(B1160w
only)
Configures the wireless network connection easily
without a computer (see "Wireless network setup"
on page 83).
• Prints configuration sheet
- Press and hold this button for about 10
seconds until the green LED blinks slowly, and
release.
• Prints supplies info report / error report
- Press and hold this button for about 15
seconds until the green LED on, and release.
• Prints manual
- Press this button each time you load a sheet of
paper in the tray if you have selected Manual
Feeder for Source in your printer driver.
3
Info (B1160
only)
• Prints configuration sheet
- Press and hold this button for about 10
seconds until the green LED blinks slowly, and
release.
• Prints supplies info report / error report
- Press and hold this button for about 15
seconds until the green LED on, and release.
• Prints manual
- Press this button each time you load a sheet of
paper in the tray if you have selected Manual
Feeder for Source in your printer driver.
4 Power/
Cancel
• You can turn the power off or wake the machine
up from the sleep mode with this button.
• Stops an operation at any time