Dell C600 Laptop User Manual


 
Removing and Replacing Parts 35
7 Lift up the right side of the display panel, and pull the panel out of the
display-assembly top cover at an angle.
Replacing the Display-Assembly Top Cover
If you are replacing the display-assembly top cover, remove the support
bracket.
1 Remove the two M2 x 4-mm screws on the left side of the
display-assembly top cover and the two M2 x 4-mm screws on the right
side of the display-assembly top cover.
2 Lift the support bracket out of the display-assembly top cover.
Replacing the 12.1-Inch Display Panel
1 Place the left edge of the display panel against the left side of the
support bracket in the display-assembly top cover, and elevate the right
side of the panel with your hand.
2 Lay the display panel into the display-assembly top cover.
3 Reinstall the four M3 x 3-mm screws that secure the display panel to
the support bracket.