Filter
Top Products
150 Removing and Installing Parts
Replacing the FlexBay Drive Panel Insert
1
Slide the drive panel insert tab into the slot on the bezel.
2
Push the panel insert towards the bezel till it snaps in place.
NOTE: To comply with FCC regulations, it is recommended that you replace the
drive panel insert whenever the floppy drive is removed from the computer.
Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: To guard against likelihood of electric shock, laceration by moving fan
blades or other unexpected injuries, always unplug your computer from the
electrical outlet before opening the cover.
Removing a Media Card Reader
1
Follow the procedures in "Before You Begin" on page 103.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 105).
3
Remove the bezel (see "Removing the Bezel" on page 135).
1 drive panel insert (optional) 2 slot
1
2
book.book Page 150 Monday, October 6, 2008 11:38 AM