Dell E228WFP Computer Monitor User Manual


  Open as PDF
of 37
 
Back to Contents Page
Setting Up Your Monitor
Dell™E228WFPFlatPanelMonitorUser'sGuide
Connecting Your Monitor
Using the Front Panel
Using the OSD Menu
Setting the Optimal Resolution
Using the Dell Soundbar (Optional)
Connecting Your Monitor
To connect your monitor to the computer perform the following steps/instructions.
Using the Front Panel Button
Usethebuttonsonthefrontofthemonitortoadjusttheimagesettings.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.
or
1.
Turn off your computer and disconnect the power cable.
2.
Connect either the white DVI or the blue VGA cable to the connectors on the computer and the monitor.
3.
Connect the power cables.
4.
Turn on your monitor and, computer. If you do not see an image, push the input select button and ensure the correct input source is selected. If you still do not
see an image, see Troubleshooting your monitor.
 previous next