Filter
Top Products
Note: Pin 1 is at the top right.
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If desired, you
can select different settings, but in most cases monitor installation is automatic.
Pin
Signal Assignment
Pin
Signal Assignment
Pin
Signal Assignment
1
T.M.D.S. Data 2-
9
T.M.D.S. Data 1-
17
T.M.D.S. Data 0-
2
T.M.D.S. Data 2+
10
T.M.D.S. Data 1+
18
T.M.D.S. Data 0+
3
T.M.D.S. Data 2 Shield
11
T.M.D.S. Data 1 Shield
19
T.M.D.S. Data 0 Shield
4
No Pin
12
No Pin
20
No Pin
5
No Pin
13
No Pin
21
No Pin
6
DDC Clock
14
+5V Power
22
T.M.D.S. Clock Shield
7
DDC Data
15
Ground (for +5V)
23
T.M.D.S. Clock +
8
No Connect
16
Hot Plug Detect
24
T.M.D.S. Clock -
General
Model number
E228WFP
Screen type
Active matrix - TFT LCD
Screen dimensions
22 inches (22-inch viewable image size)
Preset display area:
Horizontal
473.76 mm (18.65 inches)
Vertical
296.1 mm (11.66 inches)
Pixel pitch
0.282 mm
Viewing angle
160°(vertical)typ,160°(horizontal)typ
Luminance output
300 CD/m ²(typ)
Contrast ratio
800 to 1 (typ)
Faceplate coating
Antiglare with hard-coating 3H
Backlight
CCFL edgelight system
Response Time
5ms typical
Resolution
Horizontal scan range
30 kHz to 83 kHz (automatic)
Vertical scan range
56Hzto75Hz(automatic)
Optimal preset resolution
1680 x 1050 at 60 Hz
Highest preset resolution
1680 x 1050 at 60 Hz
Video display capabilities(DVI HD playback)
480p/576p/720p