Filter
Top Products
e. keyboard trim
f. keyboard
g. palmrest
h. display-hinge brackets
i. display assembly
j. system fan
k. system board
3. Perform the following steps to remove the coin-cell battery from the computer:
a. Disconnect the coin-cell battery cable from its connector on the system board [1].
b. Pry the coin-cell battery to release from the adhesive and remove from the system board [2].
Installing the Coin-Cell Battery
1. Place the coin-cell battery into its slot on the system board.
2. Connect the coin-cell battery cable to its connector on the system board.
3. Install the:
a. system board
b. system fan
c. display assembly
d. display-hinge brackets
e. palmrest
f. keyboard
g. keyboard trim
h. hard-drive assembly
i. memory
j. battery
k. base cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the Heatsink
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
40