Filter
Top Products
Driver Installation 49
Installing or Updating the RPM Driver Package With KMP Support
NOTE: This procedure is applicable for SUSE Enterprise Linux 11 SP2.
Perform the following steps to install the RPM package with KMP support:
1
Uncompress the gzipped tarball driver release package.
2
Install the driver package using the command:
rpm –ihv kmp-
megaraid_sas-<version>.rpm
NOTE: Use rpm -Uvh <package name> when updating an existing
package.
3
If the previous device driver is in use, you must reboot the system for the
updated driver to take effect.
4
Verify that the driver has been loaded with the following system
commands:
modinfo megaraid_sas
Upgrading the Kernel
When upgrading to a new kernel, you must reinstall the DKMS-enabled
driver packages. Perform the following steps to update or install the driver for
the new kernel:
1
In a terminal window, type the following:
dkms build -m <module_name> -v <module version>
-k <kernel version>
dkms install -m <module_name> -v <module version>
-k <kernel version>
2
To check whether the driver is successfully installed in the new kernel, type:
dkms status
You see a message similar to the following one:
<driver name>, <driver version>, <new kernel
version>: installed
3
If the previous device driver is in use, you must reboot the system for the
updated driver to take effect.