Filter
Top Products
Using Your Projector 41
POWER SETTINGS—
Select and press to activate power settings. The power
settings menu provides the following options:
POWER SAVING—
Select
Off
to disable Power Saving mode. By default,
the projector is set to enter power saving mode after 120 minutes of
no activity. A warning message appears on screen showing a 60
seconds countdown before switching to power saving mode. Press
any button during the countdown period to stop the power-saving
mode.
You can also set a different delay period to enter power saving mode.
The delay period is the time you want the projector to wait without
an input signal. Power saving can be set to 30, 60, 90, or 120 minutes.
If an input signal is not detected during the delay period, the
projector turns off. To turn on the projector, press the Power button.
LED MODE—
Allows you to select between
Normal
or
ECO
mode.
Normal mode operates at full power level. ECO mode operates at a
lower power level which may provide longer LED life, quieter
operation, and dimmer luminance output on the screen.
INFORMATION—
The information menu displays the current M110 projector settings.