Filter
Top Products
24 Using Your Projector
SATURATION—Allows you to adjust a video source from black and white to fully
saturated color. Press to decrease the amount of color in the image and to
increase the amount of color in the image.
S
HARPNESS—Allows you to adjust the image sharpness. Press
to decrease the
sharpness and
to increase the sharpness.
T
INT—Press
to increase the amount of green in the image and
to increase
the amount of red in the image (selectable for NTSC signal only).
DISPLAY (in PC Mode)
VIDEO MODE—Allows you to
optimize the projector's
display mode.
•
PC
,
Movie
,
sRGB
-
provides accurate color
representation
•
Game
, and
Custom
- set
your preferred settings
NOTE: If you adjust
the settings for White
Intensity or Degamma, the
projector automatically
switches to Custom.
S
IGNAL TYPE—Allows you to
manually select the signal
type. You set the signal
type to RGB, YCbCr, or YPbPr.
Z
OOM—Press to digitally magnify a default area of image in the center of the
screen and press to reduce the zoomed image.
Z
OOM NAVIGATION—Press to navigate projection screen.
W
HITE INTENSITY—Set 0 to maximize the color reproduction and 10 to maximize
the brightness.
D
EGAMMA—Allows you to adjust the color performance of the display. You can set
the Degamma value to: 1, 2, 3, and 4. Adjust among the 4 preset values to change
the color performance of the display.
H
ORIZONTAL POSITION—Press to move the image to the left and to move the
image to the right.