Filter
Top Products
Fan 33
Replacing the Fan
1
Align the screw holes on the fan with the screw holes on the
palm-rest assembly.
2
Replace the screws that secure the fan to the palm-rest assembly.
3
Connect the fan cable to the I/O board connector.
4
Route the power-adapter connector cable through the routing guides
on the fan.
5
Connect the power-adapter connector cable to the system-board connector.
6
Connect the I/O cable to the I/O board connector and system-board
connector.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 18.
2
Replace the power-light board.
See "Replacing the Power-Light Board" on page 16.
3
Replace the base cover. See "Replacing the Base Cover" on page 14.
4
Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 33 Tuesday, February 28, 2012 10:16 AM