Filter
Top Products
46 System Board
Replacing the System Board
1
Slide the keyboard cable into the system-board connector and press down
on the connector latch to secure the cable.
2
Align the screw holes on the system board with the screw holes on the
palm-rest assembly.
3
Replace the screws that secure the system board to the palm-rest assembly.
4
Connect the display cable to the system board connector.
5
Slide the touchpad-cable and keyboard-backlight cable into the system-
board connectors and press down on the latch to secure the cables.
1 keyboard cable
1
OM_Book.book Page 46 Tuesday, February 28, 2012 10:16 AM