Filter
Top Products
Installing the Hard Drive
1. Slide the hard drive into the connector.
2. Tighten the screw to secure it to the chassis.
3. Install:
a. access panel
b. battery
4. Follow the procedures in After Working Inside Your computer.
Removing the Memory Module
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. access panel
3. Pry the securing clips away from the memory module until it pops up.
4. Remove the memory module from its socket on the system board.
Installing the Memory Module
1. Insert the memory module into the socket and press to lock the securing clips.
2. Install the access panel.
3. Install the battery.
4. Follow the procedures in After Working Inside Your computer.
14