Filter
Top Products
Installing the Display Assembly
1. Connect the eDP cable to the display panel.
2. Tighten the screws to secure the display panel to the display assembly.
3. Tighten the screws to secure the display hinges to the display assembly.
4. Align and press in the display bezel to the display assembly.
5. Guide the WLAN cables through their tabs and then tighten the display hinge screws to secure the
display assembly.
6. Install:
a. system board
b. palmrest assembly
c. keyboard
d. memory module
e. hard drive
f. access panel
g. optical disk-drive
h. battery
7. Follow the procedures in After Working Inside Your computer.
Removing the Camera
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. Battery
b. optical disk-drive
c. access panel
30