Filter
Top Products
Dell PowerConnect™ Firmware CLI Transition Guide
April 6, 2011 Page 20
Feature Previous Implementation Dell™ PowerConnect 4.x Implementation
IPv6
Multicast
ipv6 pimsm join-prune-
interval
This command is replaced by the ipv6 pim join-prune-
interval command.
IPv6
Multicast
ipv6 pimsm register-
threshold
This command is replaced by the ipv6 pim register-rate-
limit command.
IPv6
Multicast
ipv6 pimsm rp-address This command is replaced by the ipv6 pim rp-address
command.
IPv6
Multicast
ipv6 pimsm rp-candidate This command is replaced by the ipv6 pim rp-candidate
command.
IPv6
Multicast
ipv6 pimsm spt-threshold This command is replaced by the ipv6 pim spt-threshold
command.
IPv6
Multicast
ipv6 pimsm ssm This command is replaced by the ipv6 pim ssm
command.
IPv6
Multicast
show ipv6 pimdm This command is removed. Refer to the IPv6 Multicast
Commands section in the CLI REFERENCE GUIDE.
IPv6
Multicast
show ipv6 pimsm interface
and show ipv6 pimdm
interface
These commands are replaced by the show ipv6 pim
interface command.
IPv6
Multicast
show ipv6 pimsm neighbor
and show ipv6 pimdm
neighbor
These commands are replaced by the show ipv6 pim
neighbor command.
IPv6
Multicast
show ipv6 pimsm rp mapping This command is replaced by the show ipv6 pim rp
mapping command.
IPv6
Multicast
show ipv6 pimsm rphash This command is replaced by the show ipv6 pim bsr-
router command.
IPv6 Routing
ipv6 forwarding
This command is deprecated. Refer to the IPv6 Routing
Commands section in the CLI REFERENCE GUIDE.
Multicast
ip pim-trapflags
This command is deprecated by the snmp-server enable
traps pim command.
Multicast ip pimsm This command is replaced by the ip pim dense and ip
pim sparse commands.
Multicast ip pimsm bsr-border This command is replaced by the ip pim bsr-border
command.
Multicast ip pimsm bsr-candidate This command is replaced by the ip pim bsr-candidate
command.
Multicast ip pimsm cbsrhaskmasklength
and ip pimsm cbsrpreference
These commands are replaced by the ip pim bsr-
candidate command.
Multicast ip pimsm dr-priority This command is replaced by the ip pim hello-interval
command.
Multicast ip pimsm join-prune-interval This command is replaced by the ip pim join-prune-
interval command.
Multicast ip pimsm register-threshold This command is replaced by the ip pim register-rate-
limit command.
Multicast ip pimsm ssm This command is replaced by the ip pim ssm command.