Option Description
• System Password Max
Password Bypass This option lets you bypass the system (Boot) Password and the internal
HDD password prompts during a system restart.
• Disabled
• Reboot Bypass (Default Enabled)
Password Change Allows you to determine whether changes to the system and hard disk
passwords are permitted when an administrator password is set.
• Allow Non-Admin Password Changes (Default)
Non-Admin Setup
Changes
This option lets you determine whether changes to the setup options are
permitted when an administrator password is set.
• Allow Wireless Switch Changes (Default)
TPM Security This option lets you control whether the Trusted Platform Module (TPM) in
the system is enabled and visible to the operating system.
TPM Security (Default)
• TPM ACPI Support
• Deactivate
• Activate
NOTE: Activation, deactivation, and clear options are not affected if
you load the setup program's default values. Changes to this option
take effect immediately.
PTT Security Allows you to enable or disable PTT Support.
• PTT Security (Default)
• Revoke Trust (Default)
Computrace (R) This field lets you activate / de-activate or disable the BIOS module
interface of the optional Computrace Service from Absolute Software.
• Deactivate (Default)
• Disable
• Activate
CPU XD Support This option enables or disables the Execute Disable mode of the
Processor.
• Enable CPU XD Support (Default Enable)
Admin Setup Lockout Allows you to enable or disable the option to enter setup when an admin
password is set.
• Enable Admin Setup Lockout (Default)
50