Dell
25
PowerEdge R515 Technical Guide
Altitude
Operating
-15.2 to 10,668m
(-50 to 35,000ft)
Note: For altitudes above 2950 feet, the maximum operating
temperature is derated 1°F/550 ft.
Storage
-15.2 to 10,668m
(-50 to 35,000ft)
The airborne contaminant level is class G2 or lower as defined by ISA-S71.04-1985.
4.5 ENERGY STAR Compliance
ENERGY STAR
®
qualified configurations can be accessed from the ENERGY STAR Compliance results landing
page on Dell.com.
4.6 Thermal
The thermal design of the PowerEdge R515 includes the following:
Closed loop thermal control algorithm: This method uses feedback temperatures to dynamically
determine proper fan speeds.
Comprehensive thermal management: The PowerEdge R515 controls system cooling fan speed based
on several different responses from critical component sensors, such as processor temperature, DIMM
temperature, IOH temperature, inlet ambient temperature, and system configurations. The thermal
management adjusts proper cooling ability for the system according to what the system really needs.
Optimized Ventilation: The R515 chassis has a custom ventilation design for optimized air flow path.
Each component and peripheral is ensured sufficient air for cooling.
Redundant Cooling: The R515 (12-HDD system) has redundant cooling, which means that other fans
take over for cooling if a fan fails.
4.7 Acoustics
The acoustical design of the PowerEdge R515 reflects adherence to Dell’s high sound quality standards.
Sound quality is different from sound power level and sound pressure level in that it describes how humans
respond to annoyances in sound, like whistles, hums, etc. One of the sound quality metrics in the Dell
specification is prominence ratio of a tone as shown in Table 6 and 0.
Fan speeds and noise levels ramp up during the boot process to add a layer of protection for component
cooling if the system were not to boot properly. Hardware configurations affect system noise levels. Dell’s
thermal control provides for optimized cooling with varying hardware configurations, as shown in the
following tables.
Table 6. Acoustical Performance (8 HDD Chassis)
Typical Configuration @ 23 ± 2 °C
Operating
Mode
L
WA
-UL
(Bels)
L
pA
(dBA)
Prominent
Tones
CPU
HDD
RAID
DIMM
2 x AMD
4180
6 core
2.6GHz
6 x 3.5‖
1TB SATA
7,200 rpm
PERC
H700
4 x 2GB
Idle
5.3
39
None
Stressed
5.3
39
None