Display Assembly and Display Latch: Dell Inspiron XPS and Inspiron 9100 Service Manual
Back to Contents Page
Display Assembly and Display Latch
Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual
Display Bezel
Display Panel
Display Latch
CAUTION: Before performing the following procedures, read the safety
instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main
battery before you begin working inside the computer.
1. Follow the instructions in "
Preparing to Work Inside the Computer."
NOTICE: Before turning the computer over and removing the screws, ensure that
the display is firmly latched closed.
2. Turn the computer over and remove the four screws (two on each side) labeled
"D" on the bottom of the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/9100/display.htm (1 of 11) [2/28/2004 7:45:55 AM]