Video Card: Dell Inspiron XPS and Inspiron 9100 Service Manual
Back to Contents Page
Video Card
Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual
CAUTION: Before performing the following procedures, read the safety
instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main
battery before you begin working inside the computer.
If you ordered a video card with your computer, it is already installed. To remove and
replace a video card:
1. Follow the instructions in "
Preparing to Work Inside the Computer."
2. Remove the left, right, and center
hinge covers.
3. Remove the
keyboard.
4. Remove the
display assembly.
5. Remove the
keyboard bracket.
6. Remove the four M2.5 x 6-mm screws from the video card.
7. Gently pull up the video card to remove it.
The video card heat sink is part of the video card assembly.
file:///F|/Service%20Manuals/Dell/Inspiron/9100/video.htm (1 of 2) [2/28/2004 7:45:57 AM]