Filter
Top Products
Display Assembly and Display Latch: Dell Inspiron XPS and Inspiron 9100 Service Manual
1 M2.5 x 6-mm screws (6) 5 display bezel
2 rubber display bumpers (6) 6 display panel
3 M2.5 x 6-mm shoulder screws (2) 7 display base
4 screw covers (2) 8 M2.5 x 3-mm screws (8)
Display Bezel
CAUTION: Before performing the following procedures, read the safety
instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main
battery before you begin working inside the computer.
1. Follow the instructions in "
Preparing to Work Inside the Computer."
2. Remove the
display.
3. Remove the six rubber display bumpers and two screw covers.
4. Remove the six M2.5 x 6-mm screws and two M2.5 x 6-mm shoulder screws and
remove the display bezel.
file:///F|/Service%20Manuals/Dell/Inspiron/9100/display.htm (6 of 11) [2/28/2004 7:45:55 AM]