Filter
Top Products
Back to Contents Page
Wireless Charging Coil
Dell™Latitude™Z600ServiceManual
Removing the Wireless Charging Coil
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the hinge covers from the computer.
4. Remove the access panel from the computer.
5. Disconnect the two cables that connect the charging coil to the system board.
6. Remove the screws that secure the charging coil to the system board.
7. Remove the wireless charging coil from the computer.
Replacing the Wireless Charging Coil
To replace the wireless charging coil, perform the steps above in the reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.